Dry Amethelis is the thermal fuel for the Florin stage. Drying changes the material's production role but not its Wisp-like movement, so it still drifts rather than behaving as a compact solid.
Sandustry Dry Amethelis facts
| Property | Confirmed value |
|---|---|
| Matter type | Wisp |
| Density | 39 |
| Source | Amethelis in Dryer |
| Processed by | Fire |
| Approximate output | 2 Dry Amethelis to 1 Florin |
Production flow
This flow identifies the material's immediate inputs and outputs. Follow the linked guides below for the surrounding chain instead of treating this compact route as a complete throughput calculator.
How Dry Amethelis works
When burned, Dry Amethelis releases Florin gas at an approximate ratio of two material pixels for one gas pixel. It can be moved with an Aerokinetic Fan. Because the conversion uses Fire and the output is a gas, the chamber needs both heat isolation and a route that prevents Florin from escaping before condensation.
How to use Dry Amethelis in a factory
Feed a contained burn chamber in a controlled stream. Enclose the upper area where gas gathers and connect that space to a Condenser. Avoid placing Water or growing Flowers next to the burner because the same heat can trigger unrelated state changes or destroy plant material.
Common Dry Amethelis problems
| Problem | What to check |
|---|---|
| Dry Amethelis drifts away | Use a wider enclosure or an Aerokinetic Fan to direct the Wisp material. |
| Florin yield varies | The stated two-to-one relationship is approximate, not a guaranteed batch recipe. |
| Gas disappears upward | The burn chamber is open or the Condenser intake does not intercept the rising Florin. |
Related Sandustry guides and source
Facts were checked against the official Sandustry Wiki page for Dry Amethelis. Sandustry is in Early Access, so confirm balance-sensitive values in the current game after updates.
